Planning · 6 min read
How Much Paint Does a Room Need? Measure, Subtract, Multiply
A few measurements and one label number tell you how much paint to buy. Here is the method, with a worked example and notes for older Michigan homes.
To estimate paint for a room, multiply the room’s perimeter by the wall height, subtract large windows and doors, then multiply by the number of coats and divide by the coverage on the can. Many labels list about 350 to 400 square feet per gallon, but check the can. Add ceilings and trim separately.
Key takeaways
- Multiply room perimeter by wall height, subtract large openings, multiply by the number of coats, then divide by the coverage on the can, which many labels list at about 350 to 400 square feet per gallon.
- Plan for primer where needed plus two finish coats, and count ceilings and trim separately because they often use different paint.
- Rough plaster, dark colors and major color changes can use more paint than the label suggests, so check the label and buy a little extra.
- Save a labeled quart of leftover paint for touch-ups, stored sealed and away from freezing.
Jump to a section
- How do you measure a room for paint?
- What does the math look like in a real room?
- How many coats should you plan for?
- How much paint do ceilings and trim need?
- What can make a room need more paint than the math says?
- How do you total several rooms and buy the right amount?
- What should you do with leftover paint?
- When should you let a painter quantify it?
- Questions
How do you measure a room for paint?
You need three measurements: the length of each wall, the wall height, and the size of anything that will not be painted.
- Measure the perimeter. Add up the length of every wall at the floor. For a simple rectangle, that is two lengths plus two widths.
- Measure the height from floor to ceiling. Older Grosse Pointe homes often have taller ceilings than newer houses, so do not assume eight feet.
- Multiply them. Perimeter times height gives total wall area in square feet.
- Subtract openings. Large windows, doors and big built-ins that will not be painted come out. Small ones, such as a switch plate, can be ignored.
Round up as you go. A measurement that is a little high is much safer than a little low. Do not forget closets if they are being painted, and measure each wall separately if the room is not a simple rectangle.
What does the math look like in a real room?
Take a 12 by 14 foot room with nine-foot ceilings, two windows and one door.
| Step | Math | Result |
|---|---|---|
| Perimeter | 12 + 14 + 12 + 14 | 52 ft |
| Wall area | 52 × 9 | 468 sq ft |
| Subtract openings | about 60 for two windows and a door | 408 sq ft |
| Two coats | 408 × 2 | 816 sq ft |
| At 350 per gallon | 816 ÷ 350 | about 2.3 gallons |
In practice, you would buy three gallons, or two gallons plus two quarts if you want a smaller cushion. The point is the method, and the numbers will differ for your room. Always use the coverage figure on the can you are actually buying.
Now try a larger room with a fireplace, the kind many older Metro Detroit homes have: 16 by 20 feet, ten-foot ceilings, four windows, two wide doorways and a fireplace wall. The perimeter is 72 feet, so with ten-foot ceilings the wall area is 720 square feet. Taking out roughly 120 square feet for the windows, doorways and fireplace opening leaves about 600. Two coats is 1,200 square feet, which is about 3.4 gallons at 350 square feet per gallon, or 3 gallons at 400. That spread is why the number on your can matters, and why buying toward the higher figure is the safer call.
How many coats should you plan for?
Typically, primer where needed plus two finish coats, though check the label. Patched areas and bare plaster need primer. A major color change, a dark color or a red can need extra coats. Painting a pale color over a similar one may go faster, and some paints cover better than others.
It helps to read how many coats of paint you need and whether you need primer, since primer changes the math. A tinted primer can also lower the number of finish coats needed in some color changes; ask your paint store.
How much paint do ceilings and trim need?
Count them separately. Ceilings are usually painted with a flat finish, and you measure them by multiplying length by width. A 12 by 14 foot room has 168 square feet of ceiling, so two coats comes to 336 square feet, roughly one gallon.
Trim, doors and windows are different. They are usually satin or semi-gloss, and while the surface area is small, the paint is a separate can. Figure trim the same way, as length times height, with the height in feet: 52 feet of seven-inch baseboard (about 0.58 feet tall) is roughly 30 square feet per coat, and casings add to that. A quart often covers two coats on the baseboards of an average room, but casings and tall baseboards can push it past a quart. A room with lots of woodwork, built-ins or several doors may want a gallon, and a whole house of trim and doors often takes several.
Doors add up faster than people expect. A standard interior door is roughly 18 to 20 square feet per face, so two coats on both faces uses most of a quart, and six-panel doors have extra surface in their raised panels. Our guides to painting ceilings and painting baseboards, casings and chair rails go through the work.
Painting rooms like this in Grosse Pointe?
Tell us about your home and we’ll be in touch to talk it through.
What can make a room need more paint than the math says?
The label’s coverage number assumes a smooth, sealed, mid-tone surface. Real rooms have wrinkles:
- Rough or textured walls and ceilings. Skip-trowel plaster, knockdown and popcorn texture have more surface area and soak up more paint than a smooth wall. Our guide to painting textured walls and ceilings covers the technique.
- Bare plaster or new patches. They absorb the first coat, which is why primer comes first. Old plaster that has been patched many times can be thirsty in spots.
- Dark or saturated colors. They may need more coats for even coverage.
- Big color changes. Going from dark to light, or the reverse, can add a coat.
- Tall ceilings and stair halls. Wall area grows quickly with height. On a stair wall, estimate the tallest and shortest points from the floor or landing and average them. Never set up a ladder on the stairs to measure; for a tall stair hall, ask a painter to measure.
- Wasted paint in trays and rollers. A little always stays in the roller cover.
Beyond the math, a little extra helps. A wall that runs short halfway through the second coat is a headache, because a second can mixed on a different day, or from a different batch, may show a slight difference.
How do you total several rooms and buy the right amount?
Do each room on its own sheet, then add them up by paint type. Keep separate totals for walls, ceilings and trim, since each uses a different product or sheen. If two rooms share a color and sheen, combine them and buy the larger size, which makes it easier to keep the color consistent from room to room.
Rounding is your friend. If the total is 4.2 gallons, buy five, or four gallons plus a couple of quarts, and keep the extra for touch-ups. In a whole-house project, older homes often have more doors, casings and built-ins than newer ones, and each has several faces to paint, so the trim total tends to surprise people. A written scope that lists each surface helps you check your own math.
- Total all the wall, ceiling and trim areas for the whole project before buying.
- Buy the same product in the same sheen for each surface type, tinted at the same time if you can.
- Mix multiple cans of the same color together in one larger pail before painting a room, to even out small batch variations.
- Test a large sample on the wall in the room’s light before buying gallons of any color, because screens and paint chips mislead.
- Ask the paint store about its return policy before you buy, since tinted paint is often non-returnable.
- Write down the color name and number, the sheen and the room on the lid.
What should you do with leftover paint?
Keep a labeled quart or pint for touch-ups. Our touch-up guide explains why a matching can matters.
- Transfer to a smaller, clean container so there is little air inside. Seal it tightly.
- Label it with the color name and number, sheen, room, brand and date.
- Store it indoors, where it will not freeze or overheat. Michigan garages and sheds swing from freezing to hot, and freezing can ruin latex paint.
- Stir before using and check that it looks and smells normal.
- Dispose of old paint by your community’s rules. Many places take liquid paint at household hazardous waste collections, and some allow fully dried latex paint in the regular trash. Check locally before you pour or toss anything.
When should you let a painter quantify it?
For a single bedroom, you can do the math yourself. For a whole house, a tall stair hall, textured ceilings or a big color change, a painter can measure surfaces more reliably, including doors, trim and areas people forget. A clear written scope that lists rooms and surfaces is the foundation of any interior painting job, and it makes it easier to compare quotes. Our guide to interior painting cost factors explains what shapes a scope.
Measure carefully, round up, and keep the leftovers labeled. That is nearly all there is to it.
Questions
How many gallons of paint do I need for a 12 by 14 room?
With nine-foot ceilings and typical openings, the walls come to roughly 400 square feet, so two coats usually take a bit over two gallons at about 350 square feet per gallon. Check the coverage on your can, and add extra if the walls are rough or the color change is big. Ceilings and trim are extra.
How much area does a gallon of paint cover?
Many labels list about 350 to 400 square feet per gallon on a smooth, sealed surface. Rough plaster, bare patches and dark colors can need more, so check the label for your paint.
How long can I keep leftover paint?
If it is sealed tightly, labeled and stored indoors where it will not freeze, latex paint often stays usable for years. Stir it and check that it looks and smells normal before use. Throw out paint that is lumpy, separated beyond stirring or smells sour, following your community’s disposal rules.
About the author
Guiffre's Painting Co.
Family-owned interior painting and plaster repair serving Grosse Pointe and Metro Detroit. Owner Bob Guiffre has been painting for more than 37 years — more than 1,800 homes — and his son, Bobby, works beside him on every project. We paint with Sherwin-Williams. Estimates are free. Insured: $1,000,000 general liability. Call (586) 722-3277.